Proper Pool Heater Maintenance in Fort Lauderdale

Nothing beats a round of swimming in warm-water during those chilly winters in Florida. In fact, having a swimming pool with warm water is used for therapeutic purposes all year long, so installing one is a great idea. However, installing a pool heater isn’t where it stops – proper maintenance will need to be done in order to keep the heater functioning. For those looking for a good pool maintenance company that offers pool heaters Fort Lauderdale, then All Florida Pool & Spa Center has offerings ranging from gas to electrical pool heaters.  Below, we will explore calcium and mineral build up, checking filters and checking the compressor for proper pool heater maintenance.

Pool Heaters Fort Lauderdale

The most common type of pool heaters are gas heaters. These heaters run on propane tanks or natural gas. Due to the warmth they provide, spiders and other insects can tend to hide inside pool heaters  It’s important to ensure spider webs and other debris are cleaned off the heater on a routine basis. This is because debris can block off the burner opening, which can also lead to big problems.

Pool heaters can aid in making your swimming pool increasingly enjoyable and comfortable, especially when the temperature drops.  For heating the water after a cold night or expanding your swimming season, pool owners looking for pool heaters Fort Lauderdale can get a gas pool heater, propane pool heaters, solar pool heaters and even pool heat pumps to help make your pool water temperature perfect any time during the year.

Calcium & Mineral Buildup

Hard water contains a large amount of magnesium and calcium and those levels vary throughout the United States.  However, Florida is well known for their hard water. Calcium and magnesium are left in the pool water after the water has evaporated and this increases water hardness. If you find that the calcium hardness is too low, you can raise the calcium hardness in order to fix this problem.

Checking Pool Compressors

In order to capture heat and dispense it to different places, heat pumps require electricity. As the pump circulates the water in the pool, the water drawn from the pool will pass through the heat pump and filter. The pool heater has a built-in fan that captures the air from the outside and pushes it over the evaporator coil.

Liquid refrigerant that is inside the evaporator coil is responsible for absorbing the heat and it becomes a gas. The warm gas that is in the coil will then pass through the compressor.  The compressor turns up the heat, brewing an extremely hot gas that will then pass through the condenser. The compressor needs to be checked on a routine basis in order to make sure it is functioning properly.

Checking Filters

It is important to know whether or not your pool filter is working properly. Without knowing, you could end up having to take a couple of days to clear your pool water. You could even end up spending money on chemicals just to get the water back to normal.

If you aren’t sure if your filter is working properly, you can add a scoop of sand into the skimmer. After you have added it, take a look at the pool jets and see if you can spot cloudy water coming back in. If you can, then you probably have a filter issue that you need to get fixed.

If you own a pool, and you have a heater to warm the water, simply installing the heater isn’t the end of the story. It is important that you take the proper steps to keep it working properly. If you’re serious about keeping your pool up-to-date, you can contact the professionals at All Florida Pool & Spa Center.

Categories
Archives
X
Scroll to Top