Ask Our Pool Service in North Miami: What Can Go Wrong with Your Pool Filter?

A swimming pool is one of the major applications of a water filter, but as with any such device, things can go wrong. Every pool owner wants their water to be clear and clean. If it’s not, then you’re likely to seek pool service in North Miami. In South Florida you can swim for many more months out of the year than up north. While this is a convenient way of life, it provides more opportunities for things to go wrong.

To clean the water a filter must be working properly. Any problems can reduce or completely stop any removal of debris, particulates, or even harmful microbes. Here are some of the signs your pool filtration system may be on the fritz.

1. Filter Materials Collect in the Water: Sand and diatomaceous earth (DE) filters most commonly exhibit this problem. The powder in each consists of very small particles so you’ll normally see some in the pool, particularly after backwashing. There could be a problem if you see a steady stream of material. A broken standpipe in a sand filter or a tear or crack in a DE filter may be the culprit. Even a loose bolt can allow powder to escape, so it’s important to have the system checked.
2. Water Drips or Pools around the Filter: This is the most obvious sign of a leak. There could be holes in the filter and the leak can ultimately cause the water level in your pool to fall. First, try to find where the leak is coming from. A patch might work but is typically is not a lasting solution. If there’s a hole in the tank, the entire filter may have to be replaced. Find professional pool service in North Miami if you’re not sure of the reason or to get the best advice on fixing the problem.
3. The Filter Is Running On Shorter Cycles: A filter might do so if a pool’s not used much or there are more contaminants due to heavy use. Sometimes it could indicate a problem. It could be your pump is too strong for the unit. The filter might be sized too small. Only a pool professional can help you with this. Shorter cycles can also indicate an algae clog, a worn cartridge, or not enough chlorine.
4. The Filter Pressure Gauge Is Low/High: A low pressure reading can signify a blockage in a line before the filter, while high pressure can mean an obstruction lies beyond it. Look for clogs or that the return valve stays open.

There are various things that can go wrong with your pool filter and numerous ways to tell what’s wrong. Call All Florida Pool & Spa if a problem is suspected and get top-notch advice, repairs, and pool service in North Miami.